equipment list

MacKay Measures Up—Time after time

"Our customers tell us that their number one need is to consistently receive parts to print, delivered on time and within their planned budget. I’m glad to report that MacKay meets that critical need. And those customers will back that up."
—Mike MacKay

Production CNC Milling Centers

• State of the art Makino Machining Center: Three (3) LeBlond – Makino 400 mm horizontal machining
• centers (xyz) 22” cube, 20,000 rpm linked by an automated pallet delivery system.
• Two (2) LeBlond – Makino 400 mm horizontal machining centers (xyz) 22” cube, 20,000 rpm.
• One (1) LeBlond – Makino A55E horizontal (x,y, z) 22 inch cube, 20,000 rpm, full 4th and 5th axis.
• One (1) LeBlond – Makino A-51 horizontal (x,y, z) 22 inch cube, 12,000 rpm.
• Two (2) Mori – Seiki SV – 500B/40 vertical machining center (xyz) 40” x 20” x 20”, 10,000 rpm.
• One (1) Mori – Seiki SV – 500/40 vertical machining center 31.5 x 20.0 x 20.0, 10,000 rpm.
• One (1) Mori – Seiki SV – 500/40 vertical machining center 31.5 x 20.0 x 20.0, 10,000 rpm, full 4th axis.
• One (1) Fanuc mill/drill center (xyz) 21” x 13” x 12”, 10,000 rpm.

Production CNC Turning Centers

• One (1) Tsugami 26mm Swiss type Turning Center with dual spindles, and independent turrets with live
• tooling.

• Two (2) Tsugami 20 mm Swiss type screw machines.
• Two (2) Mori – Seiki DL 151Y twin spindle 8-axis turn/mill Y-axis cell with bar feed 1.750” through hole.
• One (1) Mori – Seiki CL – 20 chucker with bar feed and gantry robot loader, 8” chuck.
• One (1) Mori – Seiki SL – 0 turning center, 6” chuck.
• One (1) Hardinge DSM with “Omni – Turn” conversion and bar feed.
• Two (2) Mori-Seiki NL 2000 turning centers, six (8) inch chuck and collets, Bar feeder equipped 280 PSI
• coolant system.

• One (1) small capacity gun drill, .420 maximum diameter, ten (10) inch depth.

Prototype Machining Department

• Four (4) Fadal VM 3016 CNC Mills with 32 bit processors and Gibs Cam Programming System, 10,000 rpm.
• One (1) Mori – Seiki SV – 400 vertical machining center (xyz) 22” x 16” x 18.5”, 12,000 rpm.
• Two (3) Bridgeport E – Z Trak mills for prototype work.
• Two (2) Engine Lathes, 14” swing.
• One (1) Hardinge DSM with bar feed.
• One (1) Hardinge DSM with bar feed and cross slide with CNC control.
• One (1) Haas prototype lathe with CNC control.
• One (1) Sunnen Hone Model MBB-165C.

Support Equipment and Information

• Makino Wire EDM – 12” X 18” capacity.
• Zeiss Contura – HTG 700/1000/600 CNC CMM.
• Lumonics JK702H yag laser welding system.
• Precision Technology Group laser engraver, Model Fiber Tower XP-C.
• Shrink – wrap automated packaging.
• One (1) Brown & Sharpe manual CMM.
• One (1) 50X Optical Comparator.
• Two (2) 10X Optical Comparators.
• Real time SPC data collection system.
• INTERNET access and availability.
• EDI System.
• PC based scheduling and loading.
• Class 10,000 Clean Room.
• Mass Finishing Inc, Model HZ-120 Centrifugal Tumbler.